DIE CAST 6010

Used for demolding various small thin-walled die castings, with excellent performance. It will not affect the adhesion of the coating on the casting workpiece. High stability, no harm to the environment. Package specification: 20L, 200L barreled

DIE CAST 6020

It does not contain any oil and is easy to clean. It is particularly suitable for die casting and demolding of zinc alloy materials, and can be used excellently for demolding exquisite jewelry products. It will not affect the adhesion of the coating on the casting workpiece. High stability, no harm to the environment. Mainly used for low temperature series die casting, with excellent anti accumulation ability. Package specification: 20L, 200L barreled

DIE CAST 6090

The formula utilizes the latest chemical technology to make it easier for the product to wet the mold, achieving better mold release and lubrication effects. It does not contain silicone oil and wax components, which can effectively prevent the accumulation of mold release agents. It is particularly suitable for mold release of castings that require a bright surface, and has a very good effect on zinc alloy workpieces with strict surface requirements. Containing a certain amount of mineral oil, it is suitable for medium and low temperature zinc alloy die casting and demolding at 220 ℃ - 300 ℃, with particularly good demoulding lubrication effect. Package specification: 20L, 200L barreled

DIE CAST MG 6220

This product is a highly concentrated and high-performance release agent for magnesium alloy die casting processing. The formula is particularly suitable for magnesium alloy die casting and release. The latest chemical formulation technology is mainly used to make the product easier to wet the mold, achieving excellent demolding and lubrication effects. Moreover, the release agent has a better effect in controlling mold temperature and protecting the mold against alloy erosion, which not only can improve the mold life, but also meet the requirements for casting release with a bright and clean surface. Package specification: 20L, 200L barreled

CASTON 958 AZ

It is particularly suitable for large workpiece die casting on large die casting machines, such as automobile and motorcycle engine parts, aluminum hub transmission device parts, and other die castings, providing excellent demolding effects. It does not affect the adhesion of the coating on the casting workpiece, has high stability, and is not harmful to the environment. The temperature range that can be applied is wide without accumulation. Package specification: 20L, 200L barreled

CASTON 306 IS

The latest chemical technology is used to make it easier for the product to wet the mold, achieving excellent demolding and lubrication effects. Used for demolding large-sized die castings such as gearbox housings and electromechanical product housings, with excellent performance. It does not affect the adhesion of the coating on the casting workpiece, has high stability, and is not harmful to the environment. It can be used in situations where the temperature varies widely without sintering or accumulation on the surface of the mold. Package specification: 20L, 200L barreled

CASTON NMF

It is a high-performance die casting and release lubricant that uses a combination of long chain alkyl compounds, water-based waxes, connecting agents, and different polymers. This product has outstanding performance in heat preservation, mold release, lubrication, prevention of sintering, thin film, and other functions, while also improving the tensile strength, ductility, and reducing the occurrence of porosity of castings. Application: Magnesium alloy material, zinc alloy. Precision die casting processes are required, including electronic digital products, IT product housings, home appliance computer housings, and thin wall and light weight die casting products. Easy to clean, good after coating and processability. Package specification: 20L, 200L barreled

CASTON 50AZ

Especially suitable for die casting of small and medium-sized aluminum and zinc alloy workpieces such as household appliances and electric tools, which can make the surface of the workpiece bright and beautiful without oxidation and discoloration. It will not affect the adhesion of the coating on the casting workpiece, and has good post coating and processability, without harm to the environment. The temperature range that can be applied is large. Package specification: 20L, 200L barreled

CASTON 90AZ

This product is an aluminum die casting release lubricant emulsified with long chain alkyl compounds, water-based waxes, high-temperature connecting agents, and high molecular polymers. Especially for small and medium-sized die castings with complex shapes and thin walls, it has good results. It can take away more heat from the release agent and has a good effect on controlling the mold temperature, improving the release quality. The product surface has no carbon residue, no water marks, and good metal luster. It does not contain petroleum products and is mainly composed of components that have no impact on the environment, fully meeting environmental requirements. Package specification: 20L, 200L barreled

STAMP TR-100 Forging release agent (oil based graphite)

Graphite based oil based release lubricant suitable for warm forging/cold heading of ferrous metals such as carbon steel, alloy steel, stainless steel, etc. At high temperatures, it has little oil smoke, no odor, and does not generate carbon deposits. It has excellent surface dispersibility and an operating temperature range of 300 ℃ - 1100 ℃. Package specification: 20KG/barrel, 200KG/barrel

STAMP TR-270H Forging release agent (oil based graphite)

A soluble oil based mold release agent suitable for nonferrous metal forging and extrusion, stainless steel, and steel forging operations. It is a special oil containing mineral oil, graphite, molybdenum, zinc oxide, and other additives. It can significantly improve the beauty of the product and extend the life of the metal mold. Deeply favored by metal extrusion enterprises and cold and hot forging enterprises, the operating temperature range is 200 ℃ - 1200 ℃. Package specification: 20KG/barrel, 200KG/barrel

CASTING FS 600 Forging release agent (oil based graphite)

The product is water based semi colloidal dispersed graphite, with good demolding and lubricating properties. Its viscous graphite film ensures complete wetting of the hot metal surface and good dispersion in water, which perfectly combines the operational advantages of mold lubricants with the cleanliness and safety of water-based lubricants. It can be widely used in various operating environments, such as mechanical forging of warm forged iron, steel, aluminum, and brass. FS600 also has high stability and efficient mold filling flow, which can play a dual role of dynamic lubrication and boundary lubrication. Operating temperature range: 300 ℃ - 1350 ℃. Package specification: 20KG/barrel, 220KG/barrel

CASTING FS 631 Forging release agent (water based graphite)

This product is a water-soluble graphite containing hot forging and warm forging efficient forging release agent, with excellent wetting properties to ensure the formation of a uniform coating on the surface of the mold. The product contains colloidal fine graphite nanoparticles, which is resistant to high temperatures, has excellent release effects, and can maintain consistent mold temperatures. The fluidity of hot metal in the mold is greatly improved. A variety of metal parts of different shapes, sizes, and weights can be produced; This product is water based, diluted with water, and has a range of 25-40 times. It has good use economy, and is suitable for a variety of different nonferrous metals, steel, alloys, as well as relatively complex production and automated forging production processes. Operating temperature range: 300 ℃ - 1350 ℃. Package specification: 20KG/barrel, 220KG/barrel

CASTING FS 645 Forging release agent (water based graphite)

A graphite containing highly concentrated water-based mold release agent suitable for hot forging of various metals such as copper, aluminum alloy, and iron and steel parts. Its excellent wetting properties ensure the formation of a uniform coating on the mold surface. The product contains colloidal graphite particles, providing excellent mold release effects. A high dilution ratio of 40 times reduces costs, and can maintain mold temperature stability. This product is free of smoke, dust, and odor, which solves the problem of metal mold demoulding when forging difficult precision products. It has the function of improving the high precision of the forged products and extending the life of the metal mold. It is used for relatively complex forging production and automated production operation processes, with an operating temperature range of 300 ℃ - 1350 ℃. Package specification: 20KG/barrel, 220KG/barrel

CASTING FS 690 Forging release agent (water based graphite)

Suitable for hot forging of aluminum alloy, magnesium alloy, copper, iron, and other metals. The product uses ultra-fine and nano solid graphite powder and organic molybdenum, adding synthetic high-temperature reverse soluble lubricant, rapidly forming a compound oil film layer at high temperatures, doubling the lubrication and mold release effects, giving the mold an ultra-long working life and a more perfect product appearance. Excellent lubrication characteristics can ensure the formation of a uniform high-temperature resistant release layer on the surface of the mold, especially suitable for products such as automobiles, engineering machinery accessories, alloy wheels, and large deep cavity mold forging processes. The operating temperature range is 300 ℃ - 1350 ℃. Package specification: 20KG/barrel, 220KG/barrel

CASTING WS 500 Forging and pressing release agent (environmentally friendly non graphite)

An environmentally friendly transparent water-based release agent (environmentally friendly, transparent, graphite-free) suitable for hot forging of large and medium-sized stainless steel and iron and steel parts. It can also be used for warm forging, cold heading, and cold extrusion processing of non ferrous metals such as aluminum alloys. Evenly spray and coat the upper and lower surfaces of the metal mold cavity. The film turns white after drying. After forging, the residual powder in the concave and convex parts of the metal mold is easy to remove. The product has no agglomeration, good mold release performance, excellent mold lubrication, and no scratches. This reduces the wear of the metal mold, has good rust resistance, improves the forging quality and output of the product, and protects the forging machine, metal mold, spray gun, storage tank, etc. Odorless, non-toxic, harmless to the skin or human body, without the potential for fire and smoke, and operating temperature range of 200 ℃ - 1200 ℃.

CASTING WS 800 Forging and pressing release agent (environmentally friendly non graphite)

This product is a light yellow transparent water-based mold release agent (environmentally friendly, transparent, and graphite-free), suitable for hot forging of ferrous metals in large and medium-sized steel parts with complex appearances. It can also be used for warm forging, cold heading, and extrusion processing of aluminum alloys. It is odorless, non-toxic, and environmentally friendly, and is harmless to the skin or human body, without the potential for fire and smoke. The lubricating demoulding performance is superior to WS500, and the operating temperature range is 200 ℃ - 1200 ℃.

CASTING DW9500 Forging and pressing release agent (environmentally friendly non graphite)

It is used for warm hot forging extrusion processing and special environmental protection release agent lotion for forging processing of small and medium-sized aluminum alloy, copper alloy and other non-ferrous metals. Evenly spray on the upper and lower surfaces of the metal mold cavity, and the film becomes transparent after drying. After forging, the metal mold is concave and convex, and there is no residual carbon deposit or dust in the pattern and text parts. The product is completely water-soluble, has good demoulding performance, and excellent lubrication. The product has no scratch and wire drawing phenomenon. The appearance is complete and beautiful, extending the life of the forging die, and has good rust resistance, improving the forging quality and output of the product. Smokeless, odorless, non-toxic, very environmentally friendly, harmless to the skin or human body, and free from the potential for fire and smoke. Suitable for operating temperatures ranging from 100 ℃ to 750 ℃.

ECOCOOL BN6150 Forging and pressing release agent (environmentally friendly non graphite)

An environmentally friendly synthetic water-based release agent suitable for warm forging of nonferrous and ferrous metals, containing high-temperature boron nitride (CBN) nanomaterials, non flammable, non polluting, tasteless, and non gas producing environmentally friendly products, containing new nano ceramic additives to prevent mold wear, including extreme pressure additives, instant mold cooling additives, and excellent release performance, which can form a thin and extremely hard nano coating on the surface of the mold in a short time, Significantly improves the service life of the mold, has extremely high smoothness, extremely low friction coefficient, and improves the coating quality. It is a top temperature and environmentally friendly mold release product (environmentally friendly and graphite free).

ECOCOOL BN6230 Glass release agent (graphite)

Demolding process for high-temperature production of glass products, for continuous automated glass bottle production lines, glass process product production, hot bending, baking and pressing process for glass tubes and glass heterosexuals, and demolding process for crystal and ceramic production.

RELEASE VP8600 Multifunctional release agent lotion

It is a release agent produced with special modified polymer lotion as the main body and a variety of additives. Its unique chemical structure makes it have the advantages of organic silicon and mineral oil. It has excellent high temperature resistance and lubrication. Suitable for thermal molding of various resin and friction material products, as a water-based release agent for automotive brake pads, clutch pads, and drum pads. With high dilution ratio, low displacement, high temperature stability, and important easy release characteristics, it does not affect subsequent work such as product painting. The water dilution ratio is 1:30-40 times. At the same time, it can be used as a release agent for rubber or plastic products, EVA shoe materials, lubricants for extruded rubber products such as conveyor belts, and for demolding between traveller molds and resin sands during sand casting and casting of metal materials. The surface of the product is clean and bright, environmentally friendly, non-toxic, and cost-effective.

MRM-400 For magnesium alloy

4.4

0.99

1:30~1:50

White lotion

6.0-8.5

The excellent thermal insulation and fluidity of the mold will be greatly improved. Moreover, its excellent lubricity can improve product defects and cracks. Suitable for processing magnesium alloy and magnesium aluminum alloy workpieces. Suitable for workpieces above 0.5mm.

MRM-700 For magnesium alloy

6.1

0.99

1:30~1:50

White lotion

6.0-8.5

With the improved fluidity of the MRM-400, it is suitable for the casting of small and thin workpieces by the tactile deformation method, such as the casting of the metal middle frame of a mobile phone.

MRM-900 For magnesium alloy

5.8

0.99

1:80~1:100

Tiny green

6.0-8.5

An extremely excellent product suitable for demolding magnesium alloy internal components, with a dilution ratio of up to 1:100, significantly improving the overall cost of users. Suitable for workpieces with ultra-thin thickness below 0.5mm.

MRM-950 For magnesium alloy

5.8

0.99

1:30~1:80

White lotion

6.0-8.5

Universal type, suitable for demolding magnesium alloy and aluminum alloy workpieces. Excellent performance, recommended dilution ratio of 1:30-80.

MRA-500 For aluminum alloy

5.2

0.99

1:80~1:100

White lotion

6.0-8.5

Proper thermal insulation of the mold cavity to liquid aluminum can improve the occurrence of defective products. Ultra thin clothing detachability, suitable for smaller products. Up to 300 ℃ can also improve the adhesion of the release agent. Suitable for demolding aluminum alloy and aluminum magnesium alloy workpieces.

MRA-800 For aluminum alloy

5.9

0.99

1:80~1:100

White lotion

6.0-8.5

Based on the MRA-500, the fluidity is improved, making the mold less prone to silting and easier to clean. The perfect combination of base oil and interfacial active agent reduces COD value, making wastewater easier to be treated.

Specially used for magnesium alloy mobile phone parts, aluminum alloy mobile phone parts, ultra-thin parts, medium plate brackets, etc., with excellent cooling, flow lubrication, and heat preservation effects. It can make the casting rapidly molded, with a uniform and smooth surface without defects, without affecting the subsequent processing and cleaning of the product. It uses high-temperature resistant film forming materials, and has good adhesion to the surface of high-temperature molds.

The latest chemical technology makes it easier for the product to warm the mold, achieving excellent release and lubrication effects. It is suitable for processing large and medium-sized aluminum alloy die casting release agents, such as automotive gearboxes, oil pans, and other large parts, as well as products with complex shapes and structures.

Suitable for die casting of small and medium-sized aluminum and zinc alloy workpieces such as household appliances and power tools, making the surface of the workpiece bright and beautiful without oxidation and discoloration.

This product has excellent instant moldability, has no corrosion to metal and plastic molds, and has no secondary pollution to rubber products. It can be effectively applied to the special release of various polyurethane like rubber products and plastic products, with a dilution ratio generally superior to similar products at home and abroad.